Here we are offer best quality for TAURUS 1911 X-MODEL REAR NIGHT SIGHT 2-Dot Tritium Rear and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend
*** Please check more details at the merchant website.
High-grade, button-rifled, chrome moly liners, with a super- smooth inside finish, restore accuracy to older guns with worn or shot-out barrels. To install: drill out existing rifling, soft (Hi- Force 44) solder or ACRAGLASnew liner in place, then cut new chamber. NOTE: Use 7/16 " drill for .25-20 liners, 13mm drill with .32-20 liners, and 19/32" drill with .38-40 and .44-40 liners.WARNING: These Redman/Brownell gun barrel liners are made for specific cartridges. Only use with specified cartridges listed in item description below. To chamber these gun barrel liners in other calibers is dangerous and can cause serious bodily injury. Mfg: Redmans SPECS: CM steel. .25-20; .257" groove diameter. .435" (11mm) O.D., 1-14 twist, 25" (63.5cm) long. .32-20; .311" groove diameter, .505" (12cm) O.D., 1-18 twist, 25" (63.5cm) long. .38-40; .40" groove diameter, .590" (15cm) O.D., 1-25 twist, 25" (63cm) longCheck price and Read more Detail At Redmans
Burrs left on the inside of the flash hole during manufacturing can cause erratic ignition. This handy tool automatically locates the hole and quickly removes the burr. A self-centering pilot collar with an adjustable stop allows quick alignment and prevents the remocal of too much brass. Mfg: RcbsCheck price and Read more Detail At Rcbs
Unlike all other hammers out there, the PSDB is all-steel precision CNC machined hammer. No cheap wood handles or over-molded screws for tips. This is a serious hammer for serious gunsmithing - hitting pins, punches, whatever. The PSDB can have 3 different hammer tip materials "on-board" - one can be screwed into each side of the hammer head, and the third screws into the bottom of the handle. So no matter what type of pin, or against what finish you might have to hit you can pick a hard or soft non-marring hammer tip for the job. The tips are held tight with large o-rings, so they'll never back-off and come loose. The PSDB is a whole new type of dead-blow hammer, with t Mfg: Magna-Matic Corporation SPECS: Total hammer weight 1 pound, 8.5 ounces Deadblow weight 3.1 ounces Steel Head weight 2.3 ounces Brass Head weight 2.5 ounces Delrin Head weight 0.5 ounces 10.5 inches tall 3.5 inches wide at the head faces Head OD at the face is 0.971 inches Head OD at tCheck price and Read more Detail At Magna-Matic Corporation
Copyright © 2020 Increase Sale Now RN53. All Rights Reserved