Products Vickerstactical Com

Products Vickerstactical Com

Here we are offer best quality for Products Vickerstactical Com and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend

  • IN STOCK
  • UP TO 70% OFF
  • FAST SHIPPING

*** Please check more details at the merchant website.

Recommend Products Hot price.

Marble Arms Rifle  Barrel Mounted 1/16
Marble Arms Rifle Barrel Mounted 1/16" 37-W Front Sight - .375" Barrel Mounted 1/16" 37-W Front Sight Steel White


Precision-made sights for rifles, both with and without ramp bases. The blade is gracefully contoured, sloping toward the front. Made of steel and nicely blued to look good on any gun. The BARREL MOUNTED FRONT SIGHT has rounded base sides for guns with the front sight dovetail cut directly into the barrel. "W" sights have a 17/32" (13.5mm) wide base. Barrel front sights are available with three beads, Pope's Island Gold, flat faced gold available in 1/16" (1.6mm) diameter. Ivory, flat faced white polymer in 1/16" (1.6mm) diameter. BARREL MOUNTED - 17/32" wide base. View Chart To Determine Overall Sight/Ramp Heights View Sight Selection Chart Mfg: Marble Arms SPECS: Steel, blue, polished finish. .620" (15mm) long. ORDERING: Select the sight height required using the Marbles and/or Williams charts and determine which Sight Style, Bead Type and Width is needed from the info above. Using the chart beside this copy, find the correct Marbles Sight andCheck price and Read more Detail At Marble Arms

Little Crow Gunworks Wft 2 Trimmer - 225 Winchester Trim Chamber
Little Crow Gunworks Wft 2 Trimmer - 225 Winchester Trim Chamber


The WFT 2 is the next generation of WFT trimmers. The two main improvements are the ability to trim up to 45 caliber and interchange trim chambers. The WFT 2 has a half inch shaft and requires a half inch chuck to drive it. The feature most customers asked for was the ability to interchange trim chambers. Instead of press fitting the trim chambers, like the original WFT, the trim chambers on the WFT 2 are a slight slip fit in bearing with a groove cut for an O-ring which creates a press fit. Changing out trim chambers is accomplished by removing the cutter and pushing out the trim chamber with the knock-out dowel that is provided. Installing the trim chamber is accomplished by setti Mfg: Little Crow Gunworks, Llc.Check price and Read more Detail At Little Crow Gunworks, Llc.

Hornady 450 Nitro Express 45 Caliber (0.458
Hornady 450 Nitro Express 45 Caliber (0.458") 480gr Dgx Bullets - 45 Caliber (0.458") 480gr Dgx 50/Box


The 45 Caliber (0.458") 480 grain DGX Bonded (Dangerous Game eXpanding) bullet features a copper-clad steel jacket bonded to a lead core to provide limited, controlled expansion with deep penetration and high weight retention. Bonding the jacket to the core prevents separation from high-energy impact on tough material like bone, ensuring the bullet stays together for deep expansion. DGX Bonded bullets are built to the same profile as the corresponding DGS (Dangerous Game Solid) bullets but expand to 1½ to 2 times their bullet diameter. Mfg: HornadyCheck price and Read more Detail At Hornady

Brownells 45° Muzzle/Cylinder Chamfering Cutter & Steel Pilot - 45° Cutter & Steel Pilot Fits 6mm/.243 Muzzle
Brownells 45° Muzzle/Cylinder Chamfering Cutter & Steel Pilot - 45° Cutter & Steel Pilot Fits 6mm/.243 Muzzle


45 chamfering cutter breaks the edges of the rifling for a clean bullet exit or chamfers revolver cylinder chamber mouths for quick reloads. Includes the cutter, a handle and one pilot, all in a polypropylene box. Interchangeable pilot keeps cutter properly aligned. Purchase extra pilots to use one cutter for many different calibers. Pilots for other calibers available separately. The 45 Cutter supplied in Sets marked with an * is 5/8" dia. to correctly chamfer the larger barrel and cylinder mouths on those calibers. All other Sets have a " diameter, 45 cutter. Mfg: Brownells SPECS: Chamfer Cutter X"X Hardened steel. 3" (8.25cm) long (except .165" cutter, 2-3/8" (6cm) long). " (12.7mm) or 5/8" (15.8mm) diameter as required. Handle X"X Aluminum. 3" (8.9cm) long. 3 oz. (85 g). Pilot - Hardened steel. 1" (3.2cm) long. .45 ACP Pilots - .45 ACP-1 fits S&W model 25Check price and Read more Detail At Brownells

Copyright © 2020 Increase Sale Now RN53. All Rights Reserved