Here we are offer best quality for Magpul Ak74 Mage and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend
*** Please check more details at the merchant website.
Double-duty reamers lengthen short chambers to modern standard or magnum lengths and cut the new long forcing cone at the same time - OR - will cut a long forcing cone without lengthening the chamber for the gunsmith seeking improved shooting performance for his customer. Flute placement, relief and angle are designed to give the best possible results on all types of barrel steel (except on chrome lined barrels, of course!). The 1½" long (approximately) forcing cone created is performance proven to give optimum results in any length chamber. (For complete instructions see below our detailed, illustrated booklet, Measuring and Rechambering Shotgun Chambers.) Reamers are gr Mfg: Brownells SPECS: 5-¾" (14.6cm) long overall. 1" (2.5cm) long hex section: ½" (12.7mm) across on 10, 12, and 16 ga.; 7/16" (11.1mm) across on 20 ga.; 3/8" (9.5mm) across on .410 (10.4mm). 1-½" (3.8cm) long forcing cone cutting section. 7 flutes, straight cuCheck price and Read more Detail At Brownells
Provides protection to locking lugs when welding or forging bolt handles by pulling heat away from these critical areas and dissipating it. Especially effective when used with Heat Control Paste. Threaded to fit securely into rear of bolt body, giving additional protection to interior threads by preventing scale formation. Flats milled on end allow use of wrench. Available separately or as a Set of five. Mfg: Brownells SPECS: Steel, blued. 4¼" (10.8cm) to 5½" (14cm) long depending on the model. #1 - 1903 & 03A3 Springfields, #3 - 98 Mauser, #4 - Remington 700, #5 - Winchester M70.Check price and Read more Detail At Brownells
Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. Mfg: Clymer SPECS: RIFLE REAMERS - 6, right-hand cutting, straight flutes. Solid pilot, integral throat. Stocked in Rougher and Finisher. 7/16" round shank with 3/8" square drive. ¼" round shank on .22 RF. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.Check price and Read more Detail At Clymer
Copyright © 2020 Increase Sale Now RN53. All Rights Reserved