Here we are offer best quality for Maverick 88 12 Gauge 8 Shot Pump Shotgun and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend
*** Please check more details at the merchant website.
G3 BUSHING, FOR TUBULAR RIVET, G3 Mfg: Heckler & KochCheck price and Read more Detail At Heckler & Koch
Developed for use in our space program to give the best possible welds, 3½% Nickel Steel Welding Rod is almost totally free of impurities and flows beautifully to produce an extremely smooth, non-porous weld with Oxy-Acetylene or TIG. Over the years many gunsmiths have asked for this rod to weld bolt handles and other items that will be polished after welding. Thanks to Jim Thompson, Maverick Gun Works of Topeka, Kansas, we've located a supplier of 3½% Nickel Steel Welding Rod. Says Jim, "I finally located some 3½% Nickel Steel Rod and the first bolt I welded was perfect. The rod is expensive but worth its weight in gold when you are welding bolt hand Mfg: Brownells SPECS: Each piece is approximately .094" (2.4mm) or .045" (1.14mm) diameter, - 12" (30.5cm) long. Sold in 4 oz. (113 g), 8 oz. (227 g) and 1 lb. (454 g) paks.Check price and Read more Detail At Brownells
Back-boring reamers are invaluable for all shops that do shotgun work, especially choke and barrel modifications. Reamers available in .005" increments from .725" to .740" in 12 gauge. Lead angle of reamer matches the angle of most chokes to blend into an existing choke. Many possible uses. Shortened barrels may be back-bored to within 2" to 3" of muzzle to provide a degree of constriction or "choke" in what would otherwise be a cylinder bore barrel. A choked barrel can be back-bored to enlarge the bore to provide "extra" constriction for competitive shooters. For rough pitted bores, these reamers provide an effective and efficient means of Mfg: Clymer SPECS: Reamers 5" (12.7cm) long. Made of M-7 high speed steel, hardened and drawn. Advise Reamer Stock # from chart.Check price and Read more Detail At Clymer
High grade, petroleum-based solvent formulated for bench top Cleaning Stations, or any convenient bucket. Use for slow soak dunk and scrub, or any way you like. Contains special organic additives designed to dissolve that gummy combination of powder fouling, dirt and old gun oil, then hold the crud in suspension so it flushes away easily. Leaves a slightly oily coating to protect against rust. Almost odorless. Stable and non-corrosive. Extremely slow evaporation; stays in your tank. Removes easily with Dicro-Clean 909™; won't mess up future bluing/plating jobs. Can damage paint, plastic and some stock finishes. Mfg: Brownells SPECS: 1 gal. (3.8L) in metal can, 5 gal. (19L) in bulk container. Not for use in "Washboard" parts washer.Check price and Read more Detail At Brownells
Copyright © 2020 Increase Sale Now RN53. All Rights Reserved