Here we are offer best quality for Itac Defense Sig Sauer Carbine and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend
*** Please check more details at the merchant website.
With the increasing use of roll pins in guns, we've been looking for a good assortment of them in stainless steel to offer. Finally found it - with 850 pins in 8 diameters and various lengths (see below). Should take care of most gun needs!Great for other shop jobs too. Make jigs, fixtures, or use to replace taper pins, dowels, groove pins, set screws, etc. Will not slip or vibrate out. Easy to use, as require no threading or taping. Can be cut to any length. Use the Roll Pin Punches for positive, safe removal. Mfg: Brownells SPECS: Kit (and Refill Paks) includes: 192 total 1/16" (1.6mm) diameter pins; 180 total 5/64" (2mm) diameter pins; 144 total 3/32" (2.4mm) diameter pins; 96 total 1/8" (3.2mm) diameter pins; 144 total 5/32" (2mm) diameter pins; 36 total 3/16" (4.8mm)diameter pins; 36 total 7/32" (5.6mm) diaCheck price and Read more Detail At Brownells
Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD73XXX) denotes bushing size. View other sizes: .185" to .250" .251" to .305" .306 to .368" Mfg: ReddingCheck price and Read more Detail At Redding
Approximately 20% extra power over the factory spring for smoother, more reliable feeding. Longer than factory spring; cut to fit most magazine tubes. In addition, .38-.40 will also fit many .30/30 and .32 Special rifles, .44-40 will also fit many heavy .45 caliber rifles, inlcuding .45/70 and .45/90. Mfg: Wolff SPECS: Tempered spring, 40" (110cm) long. Fits Win. 66, 73, 92, 94, Marlin 93, 94, 336.Check price and Read more Detail At Wolff
All S&K rings are fully machined out of solid steel bar stock, tumble finished to remove all burrs, and have a 3/8" diameter stud that locks into a 3/8" hole or slot in the base which provides windage adjustment. The rings are locked into position by tightening cooperative cone pointed set screws. The rings are precision bored diameter and, being machined rather than extruded or stamped, form a precision fit that will not slip under recoil. They are nicely contoured and trim in appearance. Rings are tumble finished and blued to achieve a military-type dull or nonglare black finish that matches the black anodized Insta-Mount bases. Bases need purchased separately. Mfg: S&KCheck price and Read more Detail At S&K
Copyright © 2020 Increase Sale Now RN53. All Rights Reserved