Here we are offer best quality for Iosso Metal Polish and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend
*** Please check more details at the merchant website.
Innovative and efficient system cleans rifle and handgun barrels with a minimum of effort and mess. Slip two felt pellets on the cleaning rod adapter, apply your favorite solvent and push through the bore to rapidly scrub out dirt and fouling. Pellets fit snugly to easily follow the rifling for fast, efficient cleaning; as you withdraw the rod, the front pellet falls off while the rear pellet polishes the bore. Lets you apply oil, cleaning solvents, J-B Bore Cleaner or Moly Bore Paste easily with minimal mess. Plain pellets are made from a highly absorbent, hardened felt; Super Intensive pellets also have interwoven brass fibers for even greater scrubbing action to qu Mfg: Vfg SPECS: Felt, white. 3/8" (9.5mm) long. Adapter - Aluminum, 1¾" (4.4cm) long. 603 fits Parker Hale .270 and larger rods. 604 fits Parker Hale .22 - 6.5mm rods. 606 fits 7-32 tpi rods. 607 fits 8-32 tpi rods.Check price and Read more Detail At Vfg
Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg: Brownells SPECS: Shank dia. is same as cut dia. Overall lengths from 2½" (6.35cm) to 3" (7.62cm). ¼" (6.35mm) dia. x .750" (19mm) long cut. 5/16" (7.9mm) dia. x .812" (20.6mm) long cut. 3/8" (9.5mm) dia. x .875" (22.2mm) long cut.Check price and Read more Detail At Brownells
Fiberglass-filled Zytel makes this direct-replacement stock completely waterproof, and nearly indestructible. Drops right on with no modifications required to the stock or rifle. Monte Carlo comb for faster target alignment with scopes. Complete with raised checkering on the wrist and forearm, front and rear sling swivel studs and non-slip, checkered buttplate. Mfg: Advanced Technology SPECS: Sytel, black, as-molded finish. 14 ½ (36cm) pull, 2 lb. 12 oz. (1.2 kg) wt.Check price and Read more Detail At Advanced Technology
Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. Mfg: Clymer SPECS: RIFLE REAMERS - 6, right-hand cutting, straight flutes. Solid pilot, integral throat. Stocked in Rougher and Finisher. 7/16" round shank with 3/8" square drive. ¼" round shank on .22 RF. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.Check price and Read more Detail At Clymer
Copyright © 2020 Increase Sale Now RN53. All Rights Reserved