Here we are offer best quality for Kriss Vector Dealer Sample and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend
*** Please check more details at the merchant website.
IPhone 5 case with knife and bottle opener Blade Style Hawkbill Special Features Knife, Bottle Opener and five colors to choose from Mfg: Mantis Knives SPECS: Case Height: 4.87", Case Width: 2.37", Case Depth: .75", Blade Style: Hawkbill, Blade Steel: 440c Stainless Steel, Lock Style: Frame Lock, Weight: 3.1 oz.Check price and Read more Detail At Mantis Knives
For most of the older .22's that no longer have a factory replacement magazine tube, these 3 kits provide the parts needed to custom-make a magazine to fit. All tube blanks have a rolled crimp on one end only. Kit No. 3: Undersized .343" O.D. 17-15⁄16" long, centerless ground, brass tube with 24" spring, follower and long cap for Savage 29A tubes as well as some earlier Savage/Stevens. This kit does not have the hole drilled in the tube. The kit is used for multiple applications and are designed to be finished to length and drilled by the end user. Mfg: Brownells SPEC: Brass tube, steel follower and spring.Check price and Read more Detail At Brownells
Machined from 7075 T6 aluminum, this combination lower and upper receiver is ideal for starting an AR-style .308 rifle build. Receiver set uses standard DPMS type .308 lower parts, bolt carrier group, charging handle, and dust cover. Upper receiver is compatible with DPMS high profile style .308 handguards. Bolt catch assembly uses a hex head screw instead of a roll pin for easier installation. Upper tension screw is built into the lower so tightening the upper to lower is quick and easy. Ultra flared magwell on lower is wire EDM cut to accept P-Mags. Receiver set includes take down pin detent spring retention screw and a Mil-Spec hardcoat anodized finish. Does not come with forward assis Mfg: Cross Machine Tool Co., Inc. SPECS: 7075 T-6 billet aluminum, hardcoat anodized, matte black. .154" (3.9mm) diameter trigger & hammer pin holes in lower. Uses DPMS pattern parts.Check price and Read more Detail At Cross Machine Tool Co., Inc.
With the increasing use of roll pins in guns, we've been looking for a good assortment of them in stainless steel to offer. Finally found it - with 850 pins in 8 diameters and various lengths (see below). Should take care of most gun needs!Great for other shop jobs too. Make jigs, fixtures, or use to replace taper pins, dowels, groove pins, set screws, etc. Will not slip or vibrate out. Easy to use, as require no threading or taping. Can be cut to any length. Use the Roll Pin Punches for positive, safe removal. Mfg: Brownells SPECS: Kit (and Refill Paks) includes: 192 total 1/16" (1.6mm) diameter pins; 180 total 5/64" (2mm) diameter pins; 144 total 3/32" (2.4mm) diameter pins; 96 total 1/8" (3.2mm) diameter pins; 144 total 5/32" (2mm) diameter pins; 36 total 3/16" (4.8mm)diameter pins; 36 total 7/32" (5.6mm) diaCheck price and Read more Detail At Brownells
Copyright © 2020 Increase Sale Now RN53. All Rights Reserved