Here we are offer best quality for Dual Rifle Scope Mount and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend
*** Please check more details at the merchant website.
Heights: Low and Medium for scopes w/objective diameters to approximately 1.75"(44.45mm). High for objectives above 1.75". Extra High for scopes with objectives up to 60mm. Mfg: Weaver SPECS: Aluminum lower; steel cap, screws, crossbolt and nut. Satin Blue, Matte Blue or brushed Stainless finish. Height (above base): 1" diameter - Low, .090" (2.28mm); Med., .164" (4.16mm); High, .332" (8.43mm); X-High, .560" (14.2mm). 30mm diameter - Low, .290" (7.3mm); High, .485" (12mmCheck price and Read more Detail At Weaver
Two specially ground punches make fitting the 870 ejector spring and housing onto Remingtons' unique 2-step rivet a snap! The hole in the face of the #1 tool allows you to fasten the ejector housing to the receiver with the lower portion of the rivet. The #2 tool is then used to secure the ejector spring within the ejector housing with the upper portion of the rivet. Deluxe Kit combines the above two punches with an ejector spring rivet cutter that lets you take off just the peened area of the front rivet. Often lets you re-peen the existing rivet. Mfg: Brownells SPECS: Punches - Hardened steel, blue finish. 2 punches, each 3-" (8.8cm) long. Rivet Cutter - Steel shaft and hardened steel cutter. 2-" (6.3cm) long, .31" (7.8mm) shaft diameter, .143" (3.6mm) cutter diameter.Check price and Read more Detail At Brownells
The OWB DropSlide by CrossBreed combines the best qualities found in the original Snapslide and the popular SuperSlide. The DropSlide features 1 ¾" belt slots that work well with 1 ¼" and 1 ½" belts and is designed to keep your firearm tight against your body. The leather backer has been reconfigured to accommodate a different position of the pocket allowing for a lower riding holster. The specially designed cut of the leather backer allows for a full grip on the firearm when drawing and extended leather on the bottom side to keep most longer barrel firearms from rubbing against your clothes and body. CZ75, 75 Compact, DropSlide Holster RH Mfg: Crossbreed HolstersCheck price and Read more Detail At Crossbreed Holsters
Looking to enhance the performance of your CZ P-10C? These match-grade barrels are drop-in ready options that are built to close tolerances, so you can get the most out of your CZ handgun. In fact, even though these barrels are designed to drop into 99 percent of CZ P-10C handguns on the market, the tolerances are so sight, there might be some slight fitting required. However, you won't have to worry about doing any hand-fitting on your own or paying a gunsmith to do it. Brownells recommends shooting 300 rounds as a break-in period to see if the barrel breaks in on its own. However, if it still needs fitting, the company will hand-fit the barrel to your slide, free of charge. Mfg: Primary MachineCheck price and Read more Detail At Primary Machine
Copyright © 2020 Increase Sale Now RN53. All Rights Reserved