Here we are offer best quality for Good Expanding 338 Lapua and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend
*** Please check more details at the merchant website.
With the increasing use of roll pins in guns, we've been looking for a good assortment of them in stainless steel to offer. Finally found it - with 850 pins in 8 diameters and various lengths (see below). Should take care of most gun needs!Great for other shop jobs too. Make jigs, fixtures, or use to replace taper pins, dowels, groove pins, set screws, etc. Will not slip or vibrate out. Easy to use, as require no threading or taping. Can be cut to any length. Use the Roll Pin Punches for positive, safe removal. Mfg: Brownells SPECS: Kit (and Refill Paks) includes: 192 total 1/16" (1.6mm) diameter pins; 180 total 5/64" (2mm) diameter pins; 144 total 3/32" (2.4mm) diameter pins; 96 total 1/8" (3.2mm) diameter pins; 144 total 5/32" (2mm) diameter pins; 36 total 3/16" (4.8mm)diameter pins; 36 total 7/32" (5.6mm) diaCheck price and Read more Detail At Brownells
JP's full mass .308 carrier is designed to provide greater reliability in suppressed setups as well as SBRs and rifles without an adjustable gas system. Heavier than a standard DPMS LR-308 carrier, the JPBC-5 allows for the additional cycling delay required for reliable function in such setups. This design incorporates forward assist serrations, making it compatible with both DPMS and Armalite rifles. Each carrier also includes out Enhanced Gas Ring for more reliable function. Requires DPMS-pattern bolt, firing pin and cam pin. Compatible only with DPMS-pattern bolts, firing pin and cam pin. Mfg: J P EnterprisesCheck price and Read more Detail At J P Enterprises
The Barnes MZ Aligner enhances the accuracy of these unique muzzleloading bullets. A separate Aligner Tool is required for each caliber and bullet type. Available in .45, .50 and .54 calibers. Mfg: Barnes BulletsCheck price and Read more Detail At Barnes Bullets
RCBS Steel Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match sizing dies. Using a precisely fitted Steel Neck Bushing reduces work hardening of the case neck brass, prolonging case life and helping to improve accuracy. Self-centering for proper alignment with case neck For best results, the use of high-end brass with consistent neck thicknesses is recommended Bushings come "in-the-white" - bare steel - so traditional case lubrication is required For use ONLY with RCBS Gold Medal sizing dies RCBS recommends having neck bushings one t Mfg: RcbsCheck price and Read more Detail At Rcbs
Copyright © 2020 Increase Sale Now RN53. All Rights Reserved