Here we are offer best quality for Best Grain For 9mm Ammo and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend
*** Please check more details at the merchant website.
Machined-from-barstock hammer features a long list of custom modifications for a match-quality trigger pull without a lot of work. Sear hooks are cut to height, then precision surface ground so just a light stoning is all that's necessary to achieve a crisp, clean-breaking trigger pull. Half-cock notch is narrowed to help prevent sear damage and pin holes are CNC-machined for location; lowered strut pin hole reduces full-cock spring pressure. Narrowed spur minimizes slide drag; larger-than-factory, Commander-style opening reduces weight for a fast fall and even faster locktimes. Fully-chamfered edges eliminate sharp points that can abrade clothing and skin. Mfg: Ed Brown SPECS: 4140 alloy steel, blue, or 420 stainless steel, SS. Rc 52-54, .020"-.022" hook height, Gunsmith installation recommended.Check price and Read more Detail At Ed Brown
Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize O.D. for precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. Mfg: Kart Precision Barrel SPECS: 4150 ordnance steel, in-the-white. Available in 5" (12.7cm), 6" (15.2cm), or Commander 4.25" (10.8cm) lengths. (N/R) Non-ramped. (W/N) Wilson/Nowlin ramp. (C/P) Clark/Para ramp. Ramped barrels require machining of frame. Requires gunsmith fitting. Includes instructions.Check price and Read more Detail At Kart Precision Barrel
Heavy duty 30mm steel rings, machined in pairs, serial numbered, and designed specifically to securely hold large, heavy scopes on hard-recoiling guns. Weaver-style clamp with big ½" nut really snugs ring to the mount. Ultra-High provides optimum height for AR-15, AR-10 and SR-25 rifles. Mfg: Badger Ordnance SPECS: Black Matte finish. Ring height measured from top of mount to center of ring; Standard - .823" (2cm), Medium - .885" (22.5mm), Medium High - 1.0" (2.5cm), High - 1.125" (2.8cm), Ultra High - 1.378" (3.5cm). Weights; Standard - 6.6 oz (187 g), High - 9 oz. (255 g),Check price and Read more Detail At Badger Ordnance
Classic steel, holds scope tightly. Fits Leupold STD, one- and two-piece bases, plus bases from Burris, Millett and Redfield. Mfg: Leupold SPECS: Steel 1" (2.5cm), 26mm (1.02") or 30mm (1.18") I.D. Gloss, polished blue. Matte, matte blue. Silver, satin nickel. Height measurements are from top of base to center of ring: 1", 26mm and 30mm: Super Low, .550" (13.9mm). Low, .650" (16.5mm). Medium, .770" (19.55mm). High, .900" (22.Check price and Read more Detail At Leupold
Copyright © 2020 Increase Sale Now RN53. All Rights Reserved