Here we are offer best quality for Bench Brtshooterssupply Com Au and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend
*** Please check more details at the merchant website.
Spiral Stitched - used primarily for first cleaning operation on the gun with No. 140 Polish-O-Ray to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of Soft Felt wheels - being of a more flexible nature, great care must be exercised to not round edges, or funnel and elongate screw and pin holes.Loose Muslin - used following each change of grit to smooth out grit marks and prepare the surface for the next finer grit. Also used to finish off the gun just prior to bluing.Note: - Use enough sections to make each wheel as wide as your polishing motor will handle - a minimum of three sections to each wheel. Never Mfg: Brownells SPECS:Stitched wheels have 3/8" (.5mm) face. Loose wheels are 20 ply. Arbor: 1/2" (12.7mm), 5/8" (15.9mm), 3/4" 919mm), 7/8" (22.2mm), 1" (22.5cm). Wheel Diameter: 6" (15.2cm), 8" (20.3cm), 10" (25.4mm).Check price and Read more Detail At Brownells
The kit includes Powder River Precision's famous striker safety lever, to remove the long trigger pre-travel on the XD trigger. Also included is a reduced power trigger and sear springs, to lower the pull weight. The included new sear has a patented angle to help lighten the pull and give a smooth crisp break. The trigger is made of tough, light weight polymer that helps speed up the reset. It also has an integral over travel stop on the back of the trigger. Using this method of over travel stop removes added stress on the trigger bar. When installed correctly, the kit will give you a short crisp trigger pull (about 3.5-4lbs) with a fast reset and cut the total trigger pull length Mfg: Powder River Precision Inc SPECS: Includes Striker Safety Lever, Reduced Power Sear Springs, Sear, and Trigger.Check price and Read more Detail At Powder River Precision Inc
With the increasing use of roll pins in guns, we've been looking for a good assortment of them in black steel finish to offer. Finally found it - with 850 pins in 8 diameters and various lengths (see below). Should take care of most gun needs! Great for other shop jobs too. Make jigs, fixtures, or use to replace taper pins, dowels, groove pins, set screws, etc. Will not slip or vibrate out. Easy to use, as require no threading or taping. Can be cut to any length; can be blued or plated. Use the Roll Pin Punches for positive, safe removal. Mfg: Brownells SPECS: Kit (and Refill Paks) includes: 192 total 1/16" (1.6mm) diameter pins; 180 total 5/64" (2mm) diameter pins; 144 total 3/32" (2.4mm) diameter pins; 96 total 1/8" (3.2mm) diameter pins; 144 total 5/32" (2mm) diameter pins; 36 total 3/16" (4.8mm)diameter pins; 36 total 7/32" (5.6mm) diaCheck price and Read more Detail At Brownells
Copyright © 2020 Increase Sale Now RN53. All Rights Reserved