Here we are offer best quality for Boggy Head Rifle Range Hours and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend
*** Please check more details at the merchant website.
Threads onto the sight tube to keep glare off the iris. Mfg: CentraCheck price and Read more Detail At Centra
For those of you who buy the HD-806 True Radius PRO sear stoning jig and want to stone your own sear nose, but find that many aftermarket sears are either barely too short or are only tall enough to give you just one crack at stoning the nose into the radius, the HD-122-G Gunsmith's sear may be just what you're looking for. It's the same EDM-machined, tool steel sear that we used in all of the Harrison Design ignition sets, but made longer from the sear pin centerline to the nose and with the nose unfinished. They typically measure .412" +/- .002". This will let the gunsmith machine and stone the sear nose to the optimum length and nose configurat Mfg: Harrison Design & ConsultingCheck price and Read more Detail At Harrison Design & Consulting
With the increasing use of roll pins in guns, we've been looking for a good assortment of them in black steel finish to offer. Finally found it - with 850 pins in 8 diameters and various lengths (see below). Should take care of most gun needs! Great for other shop jobs too. Make jigs, fixtures, or use to replace taper pins, dowels, groove pins, set screws, etc. Will not slip or vibrate out. Easy to use, as require no threading or taping. Can be cut to any length; can be blued or plated. Use the Roll Pin Punches for positive, safe removal. Mfg: Brownells SPECS: Kit (and Refill Paks) includes: 192 total 1/16" (1.6mm) diameter pins; 180 total 5/64" (2mm) diameter pins; 144 total 3/32" (2.4mm) diameter pins; 96 total 1/8" (3.2mm) diameter pins; 144 total 5/32" (2mm) diameter pins; 36 total 3/16" (4.8mm)diameter pins; 36 total 7/32" (5.6mm) diaCheck price and Read more Detail At Brownells
The BA Series Mounts are made for mounting high performance optics onto bolt action rifles with Picatinny rail scope bases. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. Horizontal split rings. The interface ensures positive engagement for both in spec and out of spec rail systems. Absolute Return to Zero via multiple locking lugs located on the bottom of the rail interface. This system offers over 3.5″ of rail interface, which provides extreme lockup on the host rifles scope base. Mfg: Masterpiece ArmsCheck price and Read more Detail At Masterpiece Arms
Copyright © 2020 Increase Sale Now RN53. All Rights Reserved