Here we are offer best quality for Aimpoint 12462 and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend
*** Please check more details at the merchant website.
The 56-50 Spencer (Taylor's) was built to C.I.P. specifications for operation in the Taylor Arms 56-50 Spencer. Rim diameter of 0.629" to 0.632", which may be too small to eject properly in some originals. Rim thickness is 0.057" to 0.061". Thickness of wall at mouth is .0125" average. Case mouth may need to be annealed if not sealing properly with low pressure loads. Maximum bullet seating depth is .375". Starline is a family owned business and prides itself on producing the highest quality brass case available. With a production process focused on quality not quantity, Starline makes the finest brass and has for more than 40 years out of their stat Mfg: Starline, IncCheck price and Read more Detail At Starline, Inc
This convenient tool cleans from Breech-to-Muzzle in one quick and easy pass. The molded rubberized core and Nomex fibers together create an effective way to trap and remove fouling. Available in .223 cal/5.56mm, .308cal/7.62mm, 9mm, .45 cal, and .40 cal, .243 cal/6.5mm, .270 cal/6.8mm, 12 gauge. Heat Resistant Outer Layer Made of heat resistant synthetic fibers (Nomex); the same material used in the protective gear trusted by firefighters, racecar drivers, and the U.S. Military. Heat resistant up to 700° F so you can be sure this cleaning product won't melt in your barrel. Rigid, durable materials trap foulng better than nylon products No Mfg: Otis SPECS: 223CAL/5.56MM (for .22 cal, .223 cal, 5.56mm). 308CAL/7.62MM (for 30-06 cal, 30-30 cal, .308 cal, 7.62mm, 300 Win Mag). 9MM (for .380 cal, 9mm, .38 cal, 357 Mag). 45CAL (for 44 Mag, .45 cal)Check price and Read more Detail At Otis
Steel, double-ended adapter lets you use Brownells piloted Facing, Crowning and Chamfering Cutters with your drill press or electric drill motor to save valuable shop time and get a smooth, chatter-free, finish cut. Adapter accepts all Brownells "-20 threaded shaft cutters; converts them for easy insertion into any 3/8" or larger drill chuck. Mfg: Brownells SPECS: Steel, blue, matte finish. 2" (5cm) long, .360" (9.1mm) diameter shaft, "-20 thread.Check price and Read more Detail At Brownells
Heavy duty, machined aluminum vise block lets you clamp an AR-15/M16 upper receiver in a bench vise without risk of marring the finish or distorting the receiver from over-tightening. Dual-use design allows the receiver to be positioned top side up or, if it's a flattop, upside down; either way, the vise grasps the block and never touches the receiver. One side of the block fits in the underside of the receiver and is held securely in place with two, steel, T-pins inserted through the takedown pin holes, so you can install optics, perform thorough cleaning, and do other work on the exterior. Or, slide a flattop receiver rail into the grooves on the other side of the block and tighten t Mfg: Precision Reflex, Inc. SPECS: Body - Aluminum, hardcoat anodized, matte black. 7" (17.8cm) long, 1¼" (3.2cm) wide, 1¼" high. Pins Steel, black oxide finish. Fits AR-15/M16/M4 and clones with .250" diameter takedown pin holes.Check price and Read more Detail At Precision Reflex, Inc.
Copyright © 2020 Increase Sale Now RN53. All Rights Reserved