Here we are offer best quality for Cheapest 308 Match Ammo and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend
*** Please check more details at the merchant website.
Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil-the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator's preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-soli Mfg: American Defense Manufacturing SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 4½" (11.4cm) long. Each ring covers 1" (2.5cm) of scope tube length. Height measured from top of rail to bottom of scope body (both models): .890".Check price and Read more Detail At American Defense Manufacturing
Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 .306 to .368 Mfg: ReddingCheck price and Read more Detail At Redding
With this Kit, plus ACRAGLAS and a vari-speed drill, you can do quick, easy, sure-to-hold repair jobs on cracked or broken stocks. Pins go in easily, won't further split the stock; cannot pull or shoot out; can be cut off at any length. Made of "half- hard" brass alloy. 60° flat-top threads for best holding. After broken surfaces are coated with ACRAGLAS and clamped tightly, drill pin hole with drill provided. Coat pin with ACRAGLAS also, and run it into hole with vari-speed drill at slow speed. After cured, cut off and dress ends. Mfg: Brownells SPECS: 2½" (6.3cm) overall length with 2" (5.1cm) threaded. Kit contains: 12 each of 1/8" (3.2mm) and 3/32" (2.4mm) Stock Repair Pins, plus (1) 1/8" (3.2mm) & (1) 3/32" (2.4mm) jobber length drills.Check price and Read more Detail At Brownells
Copyright © 2020 Increase Sale Now RN53. All Rights Reserved