308 Rifle With Open Sights

308 Rifle With Open Sights

Here we are offer best quality for 308 Rifle With Open Sights and guarantee cheaper than other online shopping store. Look inside store for get more discount,If you want to see more details Can be ordered at the online store that we recommend

  • IN STOCK
  • UP TO 70% OFF
  • FAST SHIPPING

*** Please check more details at the merchant website.

Recommend Products Hot price.

Ed Brown 1911 Trigger - 3-Hole Trigger, Long
Ed Brown 1911 Trigger - 3-Hole Trigger, Long


Precision-machined, curved shoe with a finely serrated surface provides good feel and trigger control. Shoe height is slightly oversized for precise fitting. Stainless steel bow gives smooth, no-flex trigger movement. Overtravel stop screw prevents creep. Available with Solid shoe in long or short length to let you choose the most comfortable length of pull. Drilled, 3-Hole shoe provides an even lighter trigger pull; long length only. Mfg: Ed Brown SPECS: Aluminum, silver anodized shoe; polished stainless steel bow. Shoe ¼" (6.3mm) wide, 15⁄16" (23.8mm) high. Overall length measured from center of shoe to end of bow. Short 21⁄16" (5.2cm) OAL. Long 2¼" (5.7cm) OAL. GunsmitCheck price and Read more Detail At Ed Brown

Superlative Arms Ar-15 Adjustable Gas Block .936
Superlative Arms Ar-15 Adjustable Gas Block .936" Solid - Ar-15 Adjustable Gas Block .936" Solid Melonite


The Superlative Arms patent pending "Bleed Off", direct impingement, gas block for the AR15 platform adjusts the gas flow by bleeding the gas out of the block instead of restricting the flow like conventional adjustable blocks. Results: The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas / pressure are bled out of the block allowing the system to run much cleaner and cooler. Reduction of felt recoil. Patented adjustment detent is located outside of the block and therefore no contamination. The gas adjustment screw does not restrict the gas flow; therefore there is no erosion or Mfg: Superlative Arms LlcCheck price and Read more Detail At Superlative Arms Llc

Brownells Gunsmith Replaceable Pin Punch Set - Replacement Pin Punch, 2
Brownells Gunsmith Replaceable Pin Punch Set - Replacement Pin Punch, 2" Long, .039 Dia.


Finally! What we think is the answer to the pin punch headache that has plagued us - and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now - Just Replace The Tip!Handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof C.R.S. Steel - Tensile strength of over 140,000 psi (Min.). Replaceable Punch - the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to Rc 58-60. Heads are annealed to Rc 42-45. They come in two lengths a Mfg: Brownells SPECS: Handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2½" (6.3cm) long. Replacement Pin Punch Sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 ½" lengths.Check price and Read more Detail At Brownells

Remington Carrier Spring
Remington Carrier Spring


CARRIER SPRING Mfg: RemingtonCheck price and Read more Detail At Remington

Copyright © 2020 Increase Sale Now RN53. All Rights Reserved